焊后热处理对聚变堆用奥氏体不锈钢MAG焊焊缝金属冲击韧性的影响

After heat treatment of metal active gas arc welding (MAG weld) joints of 316LN austenitic stainless steel for fusion reactor at different temperatures, Charpy impact test at liquid nitrogen temperature was carried out. The effects of heat treatment temperature on microstructure, fracture morphology and precipitates were studied with optical microscope, SEM and EDS analysis. Results indicated that the impact toughness of weld metal could be significantly improved by 873K heat treatment. However, with the rising of heat treatment temperature, the precipitates were generated gradually along the grain boundary and a gradual decrease of toughness occurred as well. All fracture was ductile. The dimple became shallow and less with the increase of temperature. Spherical and irregular precipitates were found at the bottom of the dimple. The spherical precipitates generated during welding were free from the influence of the heat treatment, and the irregular precipitates increased with the rising of temperature. High content of Mo in filler materials led to a great segregation of Mo at the grain boundary, which would promote the precipitation of σ phase. Impact toughness of weld metal decreased significantly when continuous distribution of σ phase formed at grain boundary.     

基于器件结构提高TADF-OLED器件的发光性能

为了提高以TADF材料作为主体、天蓝色荧光材料作为客体的混合薄膜的OLED器件光电性能,我们调整了器件结构,使主体材料发挥其优势。制备了基本结构为ITO/NPB(40 nm)/DMAC-DPS∶x%BUBD-1(40 nm)/Bphen(30 nm)/LiF(0.5 nm)/Al的OLED器件。研究了主-客体材料在不同掺杂浓度下的OLED器件的光电特性。为了提高主体材料的利用率,在空穴传输层和发光层之间加入10 nm的DMAC-DPS作为间隔层;然后,在阳极和空穴传输层之间加入HAT-CN作为空穴注入层,形成HAT-CN/NPB结构的PN结,有效降低了器件的启亮电压(2.7 V)。测量了有无HAT-CN的单空穴器件的阻抗谱。结果表明,在最佳掺杂比例(2%)下,器件的外量子效率(EQE)达到4.92%,接近荧光OLED的EQE理论极限值;加入10 nm的DMAC-DPS作为间隔层,使得器件的EQE达到5.37%;HAT-CN/NPB结构的PN结有效地降低了器件的启亮电压(2.7 V),将OLED器件的EQE提高到5.76%;HAT-CN的加入提高了器件的空穴迁移率,降低了单空穴器件的阻抗。TADF材料作为主体材料在提高OLED器件的光电性能方面具有很大的潜力。     

平板几何迁移算子的特征值问题

研究L^p(1相似文献   

传输线方程的高精度龙格−库塔数值求解方法

提出了一种求解传输线方程的高精度龙格-库塔(RK)方法。此方法在空间上采取高阶泰勒展开,提高了对空间微分的近似精度,减少了数值色散所带来的误差。与传统的时域有限差分法(FDTD)方法相比,在每波长采样数相同时,RK方法的计算精度更高。同时,根据Taylor模型,对外界平面波激励源进行离散,成功利用RK方法对外部场激励传输线进行求解,扩大了龙格-库塔方法在求解传输线方程时的应用范围。通过编程对平面波辐照下无限大地平面上的单导体与双导体的算例分别应用FDTD方法与RK方法进行了计算,验证了RK方法的正确性。结果表明同等计算条件下RK方法的计算精度更高。     

Li[LiCs2Cl][Ga3S6]: A Nanoporous Framework of GaS4 Tetrahedra with Excellent Nonlinear Optical Performance

A large nonlinear optical (NLO) coefficient and a wide band gap are two crucial but contradictory parameters that are difficult to achieve simultaneously in a single infrared (IR) NLO compound. A salt‐inclusion chalcogenide (SIC), Li[LiCs₂Cl][Ga₃S₆] ( 1 ), was prepared that presents a nanosized tunnel framework constructed from monotype chalcogenide tetrahedra. Highly oriented covalent GaS₄ tetrahedra in the host lead to a moderate second harmonic generation response (0.7 AgGaS₂), and ionic guests effectively broaden the band gap to the widest value (4.18 eV) among all IR NLO chalcogenides, thereby achieving a remarkable balance between NLO efficiency and band gap.     

“翻转+分段式”有机化学实验教学设计及实践研究

以FeCl3·6H2O催化合成乙酸乙酯为教学内容,采用“翻转+分段式”混合教学方法对整个实验过程进行了改革探索。通过教师准备学习资源,学生自主学习,课堂分段讲解,互动交流以及跟踪评价等,探讨了大学有机化学实验实施“翻转+分段式”混合教学方法的有效途径。实践结果表明:混合教学模式能够显著促进学生对实验内容的理解和掌握,明显增加学生自主操作的时间,还能有效降低实验过程中的安全隐患。     

群集建筑中大跨裙摆屋盖风荷载特性的数值模拟研究

以苏州太平金融大厦为工程背景,针对其大跨裙摆屋盖的风荷载作用,首先采用RNG k-ε模型模拟分析了其平均风压分布规律,以及风向变化对屋盖表面风荷载体型系数的影响;其次,引入干扰因子IF,探讨了周边建筑对大跨裙摆屋盖风荷载的气动干扰作用。结果表明:0°风向下,走廊上方屋盖两侧区域出现“上吸下顶”的叠加作用;90°风向下屋盖北侧飘带末端区域受到狭道风效应出现正压集中现象;风向变化对大跨裙摆屋盖的风荷载体型系数分布影响较大;且周围建筑物对大跨裙摆屋盖的气动干扰效应明显,主要表现为风压“遮挡效应”,而局部区域表现为风压“放大效应”。     

螺栓松动边界下纤维增强复合薄板的振动测试方法

提出了基于预埋压力传感器的量化测试方法,研究了螺栓松动边界对纤维增强复合薄板振动特性的影响。首先,自主设计并开发了带有预埋压力传感器的螺栓松动边界下复合薄板的振动测试系统,并详细介绍了系统各个部件的组成和功能;然后,归纳出一套合理、规范的松动边界下复合薄板的振动测试流程,并对HF10碳纤维/树脂复合薄板进行了实际测试。结果表明:随着螺栓松动程度的不断增加,复合薄板的固有频率逐渐降低,模态振型的节线位置也发生了不同程度的变化,但其阻尼结果呈现先增大后减小的趋势;而共振和非共振响应呈现先减小后增大的趋势。     

A look at multiparticle production via modified combinants

The European Physical Journal A - The transverse momentum ($$p_{T}$$) distribution of strange hadrons ($$K_{S}^{0}$$ and $$\varLambda $$) and multi-strange hadrons( $$\varXi $$ and $$\varOmega $$)...     

13 C Saturation-Transfer Difference (STD)-NMR Experiments Using INEPT Polarization Transfer

Saturation-transfer difference (STD)-NMR spectroscopy has been widely used to screen potential ligands for binding to large receptor molecules. The STD-NMR experiment is typically based on a proton NMR spectrum, which can suffer from spectral overlap, leading to missing information in STD-based epitope mapping. Two-dimensional STD-NMR experiments can alleviate spectral overlap, but are time consuming. Here, we examine the feasibility of saturating protons in a receptor molecule and observing the STD effect on nearby carbon nuclei after transferring polarization from protons to carbons using the insensitive nuclei enhanced by polarization transfer (INEPT) pulse sequence. We show that under favorable conditions, a 1H→13C STD-INEPT experiment can give information similar to that obtained from a two-dimensional heteronuclear experiment, but in significantly less time. The STD-INEPT experiment could be especially useful when studying mixtures of ligands in which the peak positions in the proton and HSQC spectrum change significantly, and in particular, when using high-throughput, automated methods to analyze the data.